Canister Purge Valve Automatic Tester For 

 Production Line and Laboratory

 P.N:

 H97M0013A

Vapors are produced in the fuel tank due to external heat radiation or surplus fuel gaining heat before returning to the fuel tank. These vapors are captured and then purged by way of an activated charcoal filter. A purge valve is located between the intake manifold and charcoal canister, and is actuated to allow fresh air to be drawn in through the canister to purge the captured fuel vapors. A faulty canister purge valve will cause a check engine warning and is an emission relevant component.

Canister Purge Valve Automatic Tester is an important Machine for production line and it can control, adust the product.

In the other hand, this machine can greatly reduce the number of product failures after production.

Detail

 Portable Test Equipments For All Automotive ECUs

 P.N:

 H97M0056A

HESCO have a wide range of portable test instrumentation for the testing of automotive electronic fields, ranging from Auotomotive Multiplex Nodes as BSI (Body interface system), FCM (Front Control Module), BCM (Body Control Modle), ICN (Instrument Cluster Node) to all Simple electronic boards of automotive testers and more… 

Detail

 Automatic Test Equipment

 Model: Different Models for All Purpose

Detail

 Automatic Test Equipment (ATE)

 Model: ATE 4800

Detail

 Automatic Wire Harness Test Equipment

 Model: WHT5400

WHT5400 is an optimal automatic test equipment for small and mid range cable harnesses.

This automatic wire harness testing machine is a highly advanced smart ATE.

Each blocks of this machine are a node of the network, and each block performs the test itself and then passes the information to the central computer.

The tables of this test device are easy to extend and it is possible to reduce or increase the number of tables connected to the device.

Detail

 Automotive Multiplex ECUs Final Function Test Equipment With Active Loads

 Model: MUX-ATE48XX

Automotive Multiplex ECUs Final Function Test Equipment With Active Loads is a high performance automated functional tester for newer generation automotive electronic control units with Active Loads Board included 3 Simulateted Automotive LAMPs and 1 Simulated Automotive DC Motor.

Destination Market: Automotive Industries

DUT Type: Body Control Units (BCM), Body System Interface (BSI), ABS Controllers, Front Control Module (FCM or FAM), etc...

Detail

 Automotive Multiplex ECUs Process and Assembly Tester Including Industrial Programmer

 Model: MUX-ATE48XX & Programmer

Automotive Multiplex ECUs Process and Assembly Tester is a high performance automated functional tester for all newer generation automotive electronic control units with industial and protected  programmer.

Destination Market: Automotive Industries

DUT Type: Body Control Units (BCM), Body System Interface (BSI), ABS Controllers, Front Control Module (FCM or FAM), etc...

Detail